Product ID:MOLECULAR SIEVE TYPE 13X HP;(SODIUM ALUMINOSILICATE;ZEOLITE)
MSDS Date:01/01/1996
FSC:6850
NIIN:00-189-5225
MSDS Number: CFMPT

UOP INC

25 E ALGONQUIN RD
DES PLAINES, IL 60017-5017
US

Emergency Phone: 708-391-2123/800-424-9300(CHEMTREC)

Info Phone: 708-391-2123

Cage: 02QC3

UOP LLC

DES PLAINES, IL 60017-5017 US

Telephone: 847-391-2953

Cage: 02QC3

SILICA GEL; SILICON OXIDE

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <60%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

(ALUMINUM OXIDE) (SARA 313) (NON-FIBROUS)

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: <40%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

SODIUM OXIDE

CAS: 1313-59-3

Fraction By Weight: <20%

MAGNESIUM OXIDE

CAS: 1309-48-4

RTECS: OM3850000

Fraction By Weight: <5%

OSHA PEL 15 MG/M3 PARTICULATE

ACGIH TLV: 10 MG/M3; FUME; 9596

LD50 LC50 Mixture:ORAL LD50 NOT AVAIL FOR PRODUCT.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:MAY CAUSE IRRIT.EYE:DUST &/OR
PROD MAY CAUSE DISCOMFORT &/OR IRRIT SEEN AS
TEARING,REDDENING.INGEST:UNLIKELY TO OCCUR IF PROPER SAF/HYG
PROCEDURES FOLLOWED.GETS HOT AS IT ADSORBS H2O.BURNS TO MOI ST BODY
TISSUES CAN RESULT IF PROL CONTACT.NO OTHER EVIDENCE EFFECTS FROM
AVAI INFO.INHAL:PRODUCES HEAT AS ADSORBS(SUPP)
Explanation of Carcinogenicity:PER MSDS:NTP/OSHA:NEITHER PROD NOR COMPO
CLASSIFIED OR REGULATED.IARC:SILICON OXIDE-NOT CLASSIFIED AS HUMAN
CARC(GROUP3)
Effects of Overexposure:SKIN IRRIT, EYE
DISCOMFORT,REDDENING,TEARING.BURNS MOIST BODY TISSUES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
TARGET ORGANS:OVEREXPOSURE MAY CAUSE LUNG DAMAGE.

First Aid:SKIN:WASH W/SOAP/H2O.IRRIT DEVLPS GET MED ATTN.EYE:FLUSH
W/H2O @LEAST 15MINS.IRRIT OCCURS GET MED ATTN.INGEST:DRINK @LEAST 2
GLASSES OF H2O.NEVER GIVE ANYTHING BY MOUTH IF LOSING
CONSC,UNCONSC,CONVULS ING.GET MED ATTN.INHAL:REMOVE TO FRESH
AIR.RESP PROBLEMS DEVLP GET MED ATTN.DR:PROD DESICCANT,GENERATES
HEAT AS ADSORBS H2O.USE DPROD CAN CONTAIN MATL OF HAZ NATURE.ID
MATL & TREAT SYMPTOMATICALLY.

Flash Point:WONT BURN
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:USED MATL MAY CONTAIN MATLS OF HAZARDOUS
NATURE.THE USER OF THIS PRODUCT MUST IDENTIFY HAZARDS OF RETAINED
MATL & INFORM FIRE FIGHTERS OF THESE HAZARDS.
Unusual Fire/Explosion Hazard:IN FRESH UNUSED STATE PROD NOT FLAMM;WHEN
1ST WET PROD CAN HEAT UP TO BOILING PT OF H2O.FLOODING WIL REDUCE
TEMP.

Spill Release Procedures:LG:CONFINE ENTRY TO THOSE PROPERLY
PROTECTED.SPECIAL ATTN SHOULD BE GIVEN TO EYE/RESP PROT-RECOVERY OF
DRY MATL EXPECTED TO GENERATE DUST.SWEEP,SHOVEL,VAC MATL INTO
APPROPR CNTNRS.SM:SWEEP/VAC MATL IN TO APPROP CNTNRS.DISPO OF IAW
ALL APPLIC GOVT REG.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN TIGHTLY CLSD PROPERLY LABEL
CNTNR.AVOID EYE CONTACT/DUST INHAL/REP/PROL SKIN CONTACT.
Other Precautions:PROVIDE ELECT GROUND CONNECTION TO AVOID STATIC
DISCHARGE IN EXPLO ATMSPHER & TO PREVENT PESONS HNDLG PRODUCT FROM
RECEIVING STATIC SHOCKS.

Respiratory Protection:WHERE NATURAL VENTILATION IS INADEQUATE USE
MECHANICAL VENTILATION,OTHER ENGINEERING CONTROLS,OR TOXIC DUST
RESPIRATOR(NIOSH/MSHA APPROV)TO PREVENT INHAL OF PRODUCT DUST.
Ventilation:WHERE NAT VENTI INADEQUATE USE MECHANICAL VENTI,OTHER
ENGINEERING CNTRL,TOXIC DUST RESP TO PREVENT PRODUCT DUST INHAL.
Protective Gloves:GLOVES TO AVOID PROL/REP CONTACT
Eye Protection:SAFETY GLASSES OR GOGG AS NECESSARY
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV:1.1(PIECE),2.1(CRYSTAL). HEALTH:H2O.BURNS TO MOIST BODY
TISSUE MAY RESULT IF PROL CONTACT. DECOMPO PROD:DECOMPO PRODUCTS
WILL COME FROM THESE RETAIN MATLS OF USE.PRODUCT ITSELF DOESNT
READIL Y DECOMPO UNLESS SUBJ TO EXT TEMPS/CHEMCONDITIONS.IF SUCH
OCCUR PRODUCTS WOULD INCLUDE MIX OF OXIDES SHOWN IN INGREDS.

HCC:V7
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NP
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:SUPPLEMENTAL
pH:NA
Viscosity:NA
Evaporation Rate & Reference:NP
Solubility in Water:NOT AVAILABLE
Appearance and Odor:ODORLESS TAN PELLETS,GRANULES,BEADS,WHITE POWEDER
OR CAKE.
Percent Volatiles by Volume:NA
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
SUDDEN CONTACT W/HIGH CONC OF CHEMICALS HAVING HIGH HEATS OF ADSORPTION
SUCH AS OLEFINS,HCL,ETC.
Stability Condition to Avoid:ADDN OF MOISTURE(H2O)W/O FLOODING CAN
CAUSE RISE IN TEMPS FROM HEAT OF ADSORPTION,CONTACT SKIN MIGHT
RESULT IN BURNS.
Hazardous Decomposition Products:HYDROCARBONS,OTHER MATLS THAT CONTACT
PROD DURING NORMAL USE CAN BE RETAIN ON PROD.REASONABLE TO EXPECT
DECOMPO (SUPPLE)

Waste Disposal Methods:DISCARD ANY PRODUCT(INCLUDE RETAIN MATLS OF
USE),DISPO CNTNR/LINER IN ENVIRO ACCEPTABLE MANNER IN FULL
COMPLIANCE W/ALL APPLICABLE GOVT REGS.PROD IN FRESH UNUSED STATE
NOT LISTED BY GENERIC NAME/TRADE MARK IN EPA RCRA,DOESNT POSSES ANY
HAZ CHARACTERIS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.